Used Reground 1" (.943") 4 Flute Carbide Tipped End Mill - Non-Center Cutting
RM 82.52
Cutters
Lot of (6) New BUP Utensili AC704 Carbide Shaper Cutting Blades, 60 x 25 x 2mm
RM 301.30
NOS Larsen 190-1105 Carbide Shaper Cutter, Under Cutting- 50mm Bore, 150mm Dia.
RM 132.10
Lot of (6) New BUP Utensili AA774 Carbide Rail Cutting Blades, 35 x 40 x 2mm
RM 272.41
New Erickson Tool Devlieg Lathe Boring Bar, SS100TB056775
RM 144.44
Lot of (2) New Sait 8" x 3/32" Abrasive Cut-Off Wheels, Type 1, A24R-BF, 23258
RM 74.26
New BUP Utensili Cove Carbide Blade CNC Router Railing Cutter, 25mm, AC701
RM 825.56
Lot of (6) New BUP Utensili Carbide Rail Cutting Blades, 40mm LOC, AA797
RM 326.07
(2) Used BUP Utensili 20° Angle 71mm Carbide Blade Cutterheads for Shaper
RM 825.56
1" HSS End Mill, Resharpened, 1-3/4" LOC, 3/32" Corner Fillet Radius
RM 82.52
TRW 7/8" HSS End Mill, Resharpened, 1-9/16" LOC, 3/32" Corner Fillet Radius
RM 90.77
EFC Carbide Cutter Aluminum Body For EF-200 Edge Finisher, Matt Finish
RM 330.20
EFC Carbide Cutter For EF-200 Edge Finisher, Matt Finish
RM 491.23
New BUP Utensili Cove Carbide Blade CNC Router Railing & Molding Cutter, AC701
RM 823.49
New Weldon Uni-Lead 1" HSS End Mill, 2 Flutes, 2-1/2" LOC, BMF 32-7
RM 115.54
Lot of (6) New BUP Utensili AC775 Carbide Shaper Cutting Blades, 60 x 30 x 2mm
RM 301.30
Slightly Used 5/16" HSS 4 Flute Double End Mill, Non-Center Cutting
RM 41.24
NOS Double Scallop Wood Shaper Cutter, 4" Overall Diameter, 3/4" Bore
RM 577.88
Used Enco 1740 Tool Post & (3) Holders for 14" to 20" Lathe, CA
RM 1,568.60
New CNC Carbide 11/16" Radius Cutter Shaper Brazed Carbide Insert 2.7" Diameter
RM 288.92
Used Weldon Uni Lead 3/4" Double End Mill, 4 Flutes, AAC 24-5
RM 61.88
Reground Regal 3/4" 0.710" Center Cutting End Mill, 2-Flute, 3-1/2" OL, Sharp
RM 61.92
New BUP Utensili Cove Carbide Blade CNC Router Cutter Bit, 50mm Dia, 20mm Shank
RM 619.16
Used Number 12 Screw Counterbore, 2 Straight Flutes
RM 66.01
Used Clark Round 30N 73.5 Hardness Tester Block, 771092
RM 82.52
BUP Utensili 25mm Carbide Blade CNC Router Railing Cutter with 6 Extra Blades
RM 619.16
Used BUP Utensili Carbide Blade CNC Router Railing Cutter - Needs Sharpening
RM 412.76
Used Erickson 1" Devlieg Type Boring Bar, SS100TB086925, 3/4" Tip, 9-1/4" Long
RM 202.23
Resharpened Putnam 1" HSS End Mill, 3/32" Radius, 0.966" Dia., 2-5/8" LOC, Sharp
RM 74.26
Lot of (6) New BUP Utensili AC773 Carbide Shaper Cutting Blades, 60 25 x 2mm
RM 301.30
New 1" Weldon Uni-Lead HSS End Mill, 2 Flutes, 3" LOC, BLF32-7
RM 189.85
Used 2" HSS End Mill 1-1/2" LOC, 1-1/4" Shank, 2-Flute Dull Resharpen 1.850" Dia
RM 41.24
Used Reground 1" (.963") 4 Straight Flute Carbide Tipped End Mill
RM 78.39
Used Unbranded Hardness Tester Block, HR 30N 78
RM 103.16
Reground 1-7/16" 6 Flute End Mill, Center Cutting, .180" Radius, 1-1/4" Shank
RM 82.52
Used Rockwell Hardness Tester Block, HR 30T, 73.5
RM 206.36
Slightly Used Putnam 1-1/2" End Mill, 2 Flute, 3/16" Radius, 1-1/4" Shank
RM 103.16
Used EFC Carbide Cutters w/ Cutter Body For EF-200 Edge Finisher, Matt Finish
RM 408.67
Used Reground 1" (.879") 4 Flute Carbide Tipped End Mill - Non-Center Cutting
RM 82.52
New Weldon Uni-Lead 1" HSS End Mill, 2 Flutes, 2-1/2" LOC, BMF 32-7
RM 119.67
Lot of (12) BUP Utensili 26.5mm 1.04" Radius Carbide Wood Cutting Blades AA788-1
RM 371.48
Used Reground 1" (.945") 4-Flute Carbide Tipped End Mill, Non-Center Cutting
RM 123.80
Used 1" (.953") RH 4-Flute Carbide Tipped End Mill, Non-Center Cutting, Reground
RM 107.29
Cleveland Twist Drill Mo-Max High Speed Ground Cut-Off Blade 1/8” C44715
RM 111.41
Used Weldon 2-Flute Uni-Lead 1" HSS End Mill, 3" LOC, BLF32-7
RM 123.80
BUP Utensili Carbide Brazed Blade CNC Router Railing Cutter - Needs Sharpening
RM 326.11
Used 1" OSG Cobalt End Mill w/ 1/4" Radius, 2" LOC, Dull Needs Resharpen, 1" Dia
RM 41.24
OSG 1-1/4" Cobalt End Mill, 2" LOC, 4-Flute, 1-1/4" Shank, Needs Resharpening
RM 41.24