About this product

Product Information

Protect your business electronics equipment from overload with the American Power Conversion’s AP 7932 Power Distribution Unit. The APC AP7932 rack-mounted PDU has 24 individual connectors available, giving you ample protection for home offices and larger business facilities alike. An included mount gives you the ability to secure the 70-inch PDU vertically without the need for tools for installing the NetShelter enclosure. This APC device offers a load capacity of 2880VA and has an input voltage range of 100V to 120V. Feel confident with the built-in alert system complete with LED overload indicator that continuously monitors your electronics system for excessive power consumption and alerts you when levels go beyond the user-defined thresholds. Control your rack-mounted APC AP7932 power distribution unit remotely through the Internet, Telnet, and SNMP systems. With its many features and functions, the rack-mounted APC AP7932 PDU delivers an easy-to-use operational format. The resettable circuit breakers built into these rack-mounted PDUs enable you to recover quickly when an overload event does occur. By having the settings in place, you never have to search for solutions in an emergency again. A local current monitoring display provides the ability to monitor the aggregated current draw per rack visually. You are also provided with a visible warning when the current draw is too close to the maximum amperage draw of the strip. You gain more control over your electronics equipment even when you are not able to be in the same location with the rack-mounted APC AP7932 PDU at work for you. A remote individual outlet control function gives you the power to manage outlets remotely so you can turn off any outlets not needed or recycle the unnecessary power to locked-up equipment. This will minimize expensive downtime to your business and prevents the necessity of costly travel time to the equipment’s location in an emergency. Configure a power delay sequence within the PDU. This allows you to determine what shut-down order you wish to occur should an emergency arise. This offers the ability to avoid in-rushes at start-up, potentially avoiding overloaded circuits and dropped loads. By having the ability to set predetermining parameters for shut-downs of your electronics equipment, you are able to ensure that other equipment dependent on specific equipment will continue to function properly. All APC AP7932 rack-mounted power distribution units are flash upgradeable. This means that you can upgrade firmware within these units with the use of network downloading quickly and easily for any future product enhancements that you wish to make. This rack-mounted APC device integrates with StruxureWare Data Center Expert. This is an IT-ready, scalable access monitoring system that offers continuous remote coverage for your electronics equipment. The APC AP7932 rack-mounted PDUs can handle even the heaviest loads. With twenty-four NEMA 5-20R output connections available, you have coverage for all of your electronics equipment. These NEMA 5-20R outputs are the driving force behind your energy savings and consumption monitoring. A 10-foot cable is supplied for the L5-30P input connection. The input allows the conversion of 100V to 120V of power for the minimized power usage that then transforms it into the necessary wattage required for each piece of connected equipment. You can purchase a longer cable if necessary. Before placing any other accessories in your cart, contact the customer service center to ensure compatibility with the PDU. Whatever electronics equipment you depend on within your business, you can rest assured that the APC AP7932 rack-mounted PDU will handle your power monitoring needs with ease.