This listing was ended by the seller on Thu, 2 May at 3:40 PM because the item was lost or broken.

Picture 13 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 1 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 2 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 3 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 4 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 5 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 6 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 7 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 8 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 9 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 10 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 11 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 12 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 13 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 14 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 15 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 16 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 17 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 18 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 19 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 20 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 21 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 22 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 23 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 24 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 25 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 26 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 27 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 28 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 29 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 30 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 31 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 32 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 33 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 34 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 35 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 36 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 37 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 38 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 39 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 40 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 41 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 42 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 43 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 44 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 45 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 46 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 47 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 48 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 49 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 50 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 51 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 52 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 53 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 54 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 55 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 56 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 57 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 58 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 59 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 60 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 61 of 62

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter - Picture 62 of 62

ENDED

Have one to sell?

Sell it yourself

1-20mm Carbide TiSiN Coated 4 Flute Router Bit HRC55 End Mill CNC Milling Cutter

Condition:

New

Characteristic

Size(mm)

Amount

Quantity:

More than 10 available / 10 sold

Price:

GBP 3.29

ApproximatelyRM 19.57

Postage:

Does not post to United States. See detailsfor shipping

Located in: ShenZhen GD, China

Delivery:

Varies

Returns:

60 days return. Buyer pays for return shipping. See details- for more information about returns

Coverage:

Read item description or contact seller for details. See all detailsSee all details on coverage

(Not eligible for eBay purchase protection programmes)

Shop with confidence

eBay Premium Service

Trusted seller, fast shipping, and easy returns.

Learn more- Top Rated Plus - opens in a new window or tab

Seller information

fastener-kingdom (38355)
99.6% positive feedback

Registered as a Business Seller

Report this item - opens in new window or tab

Seller assumes all responsibility for this listing.

eBay item number:324970154585

Last updated on Mar 08, 2024 11:10:20 MYTView all revisionsView all revisions

Item specifics

Condition: New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ...

Brand: Unbranded

MPN: Does Not Apply

Country/Region of Manufacture: China

Function: Milling

Material: Solid Carbide

Number Of Flutes: 4

End Mill Type: Milling Bit

Mill Diameter: 20 mm

Shank Diameter: 20 mm

Length Of Cut: 50 mm

Overall Length: 100 mm

Item description from the seller

Business seller information

Value Added Tax Number:

GB 364109311

Seller assumes all responsibility for this listing.

eBay item number:324970154585

Last updated on Mar 08, 2024 11:10:20 MYTView all revisionsView all revisions

Postage and handling

Item does not ship to United States

Item location:

ShenZhen GD, China

Post to:

Argentina, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Mexico, Spain, Worldwide

Excludes:

Afghanistan, Africa, American Samoa, Armenia, Australia, Azerbaijan Republic, Bahrain, Bangladesh, Belarus, Bermuda, Bhutan, Bosnia and Herzegovina, Brunei Darussalam, Central America and Caribbean, Channel Islands, China, Cook Islands, Fiji, French Polynesia, Georgia, Gibraltar, Greenland, Guam, Guernsey, Hong Kong, Iraq, Isle of Man, Isle of Wight, Israel, Jersey, Jordan, Kazakhstan, Kiribati, Kuwait, Kyrgyzstan, Laos, Lebanon, Liechtenstein, Macau, Macedonia, Maldives, Malta, Marshall Islands, Micronesia, Moldova, Mongolia, Nauru, Nepal, New Caledonia, Niue, Oman, Pakistan, Palau, Papua New Guinea, Qatar, Russian Federation, Saint Pierre and Miquelon, Scilly Isles, Scottish Highlands, Scottish Islands, Solomon Islands, South America, Sri Lanka, Svalbard and Jan Mayen, Tajikistan, Tonga, Turkmenistan, Tuvalu, Ukraine, United Arab Emirates, United States, Uzbekistan, Vanuatu, Vatican City State, Wallis and Futuna, Western Samoa, Yemen

Handling time

Will usually post within 10 business days of receiving cleared payment.

Taxes

Taxes may be applicable at checkout. Learn moreLearn more about paying tax on eBay purchases.

Return policy

After receiving the item, contact seller within
60 days

The buyer is responsible for return postage costs.

fastener-kingdom

99.6% positive feedback

Seller's other items Contact

Usually responds within 24 hours

Shop by category