Voltmeters

Display: 0.28" LED digital. Minimum resolution (A): 0.01A. Minimum resolution: 0.1.

Misura corrente: 50A DC (richiede shunt esterno). 1x 50A / 75mV Shunt. Misurare la tensione: DC 0 ~ 100V. Colore display: rosso / blu (doppio display). La tensione tra le linee sottili rosse e nere sottili deve essere entro 4,5-30V DC.

Screen size: 47 x 24mm. wire length: 95mm. power consumption: less than 0.2A.

Made in 1975.

The VI13800 ensures safety through simplicity, with no ranges, switches or batteries, reducing the risk of an incorrect reading. The PD440 is compatible with the new Martindale VI13800 & the Martindale VI13700.

Kewtech PAT Testers. Kewtech Products. Kewtech KT1780 Lightmate PAT Adaptor R2 Socket Tester Test Lead KIT (KEW-TM2). Kewtech Lightmate Light Testing Kit. Kewtech Lightmate Kit. Kewtech Kewcheck R2 Ring Mains Socket Tester.

The unit of value is V. 3.8, 35mm Din rail mount. Effective protection of the user load the safe operation of electrical appliances.

Note: This design uses the principle of capacitor step-down, due to high frequency capacitance impedance is smaller, so not suitable for use in high frequency electronic speed, non power frequency, sine wave or other frequency components of the occasion, otherwise easy to burn.

Read your battery bank like a fuel gauge. The current sensor can be placed on the Positive or Negative side of power. This Battery Monitor is designed to monitor performance most kind of battery systems with capacities of up to 999 Amp hours.

Di-Log DL6799 CombiVolt 5 1000V TrueRMS Voltage Continuity and Current Tester.

The integrated torch also enables you to work safely in dark surroundings. CAT IV 600V; CAT III 1000V. 12 to 1000 V / 50 to 1000 (sensitivity 1), 1000 / 12 V (sensitivity 2). -15 to 60 °C. -10 to 50 °C.

If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.

3.8, 35mm Din rail mount. The unit of value is V. Effective protection of the user load the safe operation of electrical appliances.

AC Outlet Fault Tester, But We Did It! It's Been Hard Finding a Good Quality. No Power to Outlet. Amprobe AC Outlet/Receptacle Tester. easily happen when an outlet has an Open. Ground or Outlet Wiring is Reversed.

The sensor doesn't get hot like the current shunt sense resistor which can have thermal temperature heat dissipation issues. As the resolution is 0.3A, the current reading might be flickering with 0.3A difference.

The unit of value is V. 3.8, 35mm Din rail mount. Effective protection of the user load the safe operation of electrical appliances.

Installing size: 76.0mm 39.5mm. Current resolution: 0.2A. Rate (item arrived).

Display color:red blue. Reply within 24hours. Rate (item arrived).

RTZ, Reset button, press it three seconds will Reset. Current: 0-3A ( accuracy of 0.4% ). Battery Capacity (0-99999mah). PCB Repair Machine. Hand Repair Tools. Phone NAND Test Fixture. Phone Repair Cable.

Installing: 35mm Din rail. Installing: 35mm Din rail. when the power situation is unstable. The green indicator display, when the power is. Noted: When you first connect the product, you have to wait about 1 minute, after the red light turn off, then the product will work.

IP64 Rated. Rx LEDs for continuity test indication. Single phase pole test. CE, EN 61243-3:2010, EN 61010-1:2010, EN 61010-2-33:2012. Clear digital LCD Display. 1999 Counts and quick glance LED read out.

Di-Log DL6799 CombiVolt 5 Voltage Continuity Current Tester plus extras KIT4V.

It works great and looks great.

Fluke T6-1000 Electrical Tester With FieldSense. Fluke T6-1000 Electrical Tester with FieldSense Key Features. Fluke T6-1000 Electrical Tester with FieldSense. New FieldSense technology. Insulation & Continuity Tester.