Vintage Computers, Parts & Accessories

Rev. 781220.

I've made the board two layer with the upper layer replacing the wire links. Bare PCB only! This PCB has the text Reproduction 2018 on the silkscreen to identify it as a repro, and not passing off as an original.

Very good condition. The port is not tested.

Suitable for the 8088, 8086 and 80186 processor. This will not work with the 80286 CPU. Pictures are of the actual item for sale.

VIC20 NOT included. C128 NOT included. C64 NOT included.

Upgrades your 128K Tandy Color Computer 3 to 512K Ram.

Average file size 16Kb. Hours of fun !

• Gotek floppy drive emulator. Included is a 8GB USB stick with thousands of images. • 8GB USB stick with thousands of Atari disk images.

Many people prefer the non-PNP SB16/SB32 cards for this reason.Also the CT3930 is the only Sound Blaster 32 with a real discrete Yamaha OPL3 chip. This Sound Blaster 32 is a rare gem. The SB32 is basically a cut down version of the AWE32, omitting the waveblaster daughterboard connector and onboard 512kB RAM (which is disabled on the AWE32 when you use the expansion slots anyway).

· 2.5MB of RAM. For safety reasons the outer box has been opened (at one end) to remove the four included AA batteries. The box and contents are in mint condition (see photos). · Four AA alkaline batteries (removed for safety reasons).

VIC20 NOT included. C128 NOT included. C64 NOT included. The current model has 2 decimal place resolution. Also the LED colour may vary, either Red or Electric Blue.

For sale is this original Univac 1110 lucite paperweight. Features a part of a Japanese Univac 1110 computer embedded with transistors embedded within the paperweight. 8cm x 4cm x 3cm. Photos are of the actual item for sale and the one you will receive.

New Commodore 64 Label. These are high quality reproductions. 0.8mm thick, so they're not just a sticker.

It is the high speed version but will run at any speed below 16Mhz. We have installed one of these in our ‘Eagle Spirit XL’ portable clone of the IBM XT computer from 1983 and it works great. No modifications were required, just take the 8088 CPU out and install the V20.

It will also enable 80 column width text. For early versions of the Apple IIe (part number at the top of the logic board will say 0064-A), JP1 will need to be clipped to enable 80 column text mode. For other versions (0064-B and 0087-A) which are the majority of Apple IIe computers nothing needs to be changed.

1 x 8k when using a 27C64 eprom. 2 x 8k when using a 27C128 eprom. Select 1 of 2 8k banks with the A13 Jumper. This will create a BIN file ready for burning to an eprom.

For sale is this floppy drive emulator (Gotek) for the Commodore Amiga range of computers.with included software! • Gotek floppy drive emulator. Included is a 8GB USB stick with thousands of images.

This adapter will allow you to convert an internal 50 pin IDC connection into an 68 Pin High Density interface.

The XM1541 / XE1541 cable has been long available on the internet as a solution to this problem and we needed it, so we designed this little adapter that not only does the popular XM1541, but also the XE1541 with the simple flick of a switch.

Hi your looking at a commodore 1541 II DISC DRIVE TO SUIT THE COMMODORE 64 COMPUTER. Has been tested and still in full working order and in excellent condition. Does have some slight yellowing on the top Does not come with the power supply that is up for sale on another listing if interested. I'm selling a bit more commodore 64 gear so keep a lookout Thanks for looking

1 x 16k when using a 27C128 eprom. 2 x 16k when using a 27C256 eprom. Select 1 of 2 16k banks using the Jumper.

VicSoft for the Commodore 64. Size: 21 cm x 15 cm.

CERAMIC IN GOOD CONDITION.

For sale is this Apple G3 400Mhz CPU/1MB Cache with ZIF interface. CPU is rated for 400Mhz Speed. CPU is suitable for the Apple PowerMacintosh G3 Beige computers including the Desktop, MiniTower and All-In-One.

A590 HARD DRIVE PLUS FOR AMIGA COMPUTER. HARD DRIVE & CPU FAN SHOWING SIGN OF LIFE.

Hi your looking at a vintage Macintosh QUADRA 700 COMPUTER. Still in fantastic condition Has been tested and still seems to be working ok I have not tested everything else on the computer. Do have to sell as it because it's a 25 year old computer. I have the monitor, keyboard and mouse up for sale on another listing if interested. Will be very well packed Thanks for looking

The IBM Portable Personal Computer 5155 Model 68 consists of a lightweight case with a carrying handle containing a built-in. Five expansion slots are available for the connection of most IBM Personal Computer options.

Commodore 64 Instruction Leaflet from the 1980's. The leaflet is in good condition for its age with just a few folds and creases.

Hi your looking at a keyboard to suit the early Macintosh computers Made in usa Still in good condition and working I have the monitor, computer and mouse up for sale on another listing if interested. Thanks for looking

Hi your looking at a mouse to suit the early Macintosh computers Still in good condition and working I have the monitor, computer and keyboard up for sale on another listing if interested. Thanks for looking

For sale is a VERY RARE single page sales brochure to suit the Commodore PET computer.

The ROM select switch can be accessed on the SOL without removing the rear cover. Due to human error, the switch in the right position will select the left ROM, and the in the left position will select the right ROM.

For sale is a lot of 90x 5.25” Floppy Disk Write Protect Stickers. These are new stickers, they are foil based and very thin to stop them from accidentally being taken off. Each sheet contains 18 stickers, 5 sheets included.

For sale is this Adobe Illustrator 10 software for Macintosh. Mac OS 9.1, 9.2 or 10.1. Photos are of the actual item for sale and the one you will receive.

Hi your looking at a vintage Macintosh LC-III COMPUTER I don't know to much about these but I'm pretty sure it's has some sort of expansion device fitted and maybe some extra memory chips and a 80 Meg hard drive Has been tested and still seems to be working ok I have not tested everything else on the computer. Do have to sell as it because it's a 25 year old computer. I have the monitor, keyboard and mouse up for sale on another listing if interested. Will be very well packed Thanks for looking

Hi your looking at a keyboard to suit the Macintosh LC-II COMPUTER may also fit other early macs Still in good condition and working I have the monitor, computer and mouse up for sale on another listing if interested. Thanks for looking

It can't be used to connect a buffered EI because they need the special buffered cable. TRS-80 Model I interconnect cable: it connects the M1 keyboard unit to the later non-buffer-box Expansion Interface.

Good working condition few scuff marks on machine. Keyboard included.

For sale is this new copy of ’VISICALC’ for the Radio Shack TRS-80. Catalog number 26-1566. This particular version was the first release of VISICALC on the TRS-80, made for the Model I. It was re-coded for the Z80 processor as the previous machines it was released for (Apple II, Atari 800, Commodore PET).

Hi your looking at a commodore 1541 II DISC DRIVE USER GUIDE MANUAL I'm selling a bit more commodore 64 gear so keep a lookout Thanks for looking

Hi your looking at a vintage Macintosh LC-II COMPUTER I don't know to much about these but I'm pretty sure it's has some sort of expansion device fitted and some extra memory chips and a 80 Meg hard drive Has been tested and still seems to be working ok I have not tested the word disc and everything else on the computer. Do have to sell as it because it's a 25 year old computer. I have the monitor, keyboard and mouse up for sale on another listing if interested. Will be very well packed Thanks for looking

TRS-80 Model I NEW POWER SWITCH. If your Model 1 power switch it sticky, or doesn't stay pushed in, or bypassed because it failed. you need one of these.