Test Equipment Sound Level Meters

Resolution: 0.1dB. Storage condition: -10~60 ℃ 0~90%RH. Color: Aas pictures show. Due to the difference between different monitors, the pictures may not reflect the actual color of the item. All products are quality checked.

Support 8 modes display, 3-5V can be used Input voltage: DC 3.3V-5V Frequency response: 20-22KHZ Color: Blue Size: 0.96 inch Thickness: 4mm Pins: 4 pins Model: OLED Display Module Number of channels: mono Packing List: 1pcs x 0.96 inch oled display music spectrum display module.

Resolution: 0.1dB. Storage condition: -10~60 ℃ 0~90%RH. Color: Aas pictures show. Due to the difference between different monitors, the pictures may not reflect the actual color of the item. We are always willing to work things out.

Resolution: 0.1dB. Storage condition: -10~60 ℃ 0~90%RH. We are always willing to work things out. Frequency range: 31.5Hz~8KHz.

Single chip microcomputer program: has good burning, installed directly to use. 1pc LED Music Spectrum DIY KITS With Case. 1pc Audio wire. 1pc Power wire. With the shell size: 130mm 55mm 24 mm. We are committed to resolve all issues in a friendly and satisfactory manner.

Model: UT353. It can constantly monitor ambient sound. Sound Leve Range: 30-130dB 0.1dB ±1.5dB. Due to the light and screen difference, the item's color may be slightly different from the pictures. Size: (approx) 150 X 52 mm.

(Brake Fluid Tester. Battery Tester. Cable Tester. Network Cable Tester. Body Fat Caliper. Angle Finder / Depth Gauge. every 50mm of Hgdecrease). Circuit Breaker.

We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products. ✔Auto power off: Auto shout down after approx 10 minutes of inactivity.

It supports max/minimum value, data hold, auto shutdown, low battery notification, backlight and over range indication. - Support: Max/minimum value, data hold, auto shutdown, low battery notification, backlight and over range indication.

0～9999%DOSE. Selectable from 70 to 90dB, 1dB step. 106(L)×64(W)×34(H)mm. 5 eveuts sturage for TES-1355 only. Instruction manual, Software(1355), RS-232 Cable(1355). 350g (include batteries).

Resolution: 0.1dB. Accuracy: ±3.5dB (at 94dB, 1kHz reference condition). 1 x Noise Tester. Sound level frequency weighting: A sound level frequency weighting. Large LCD screen display; 15 minutes auto power off without any operation.

The starter is SG4 type. It has a smooth 1Hz tuning step. The smallest signals received by the receiver are at the level of 0.02μV. I think it is a great platform for all kinds of modifications. for the 25 Hz 200Hz / s filter.

Sound Pressure Level: 94dB & 114dB. Sound Pressure Level : 94dB & 114dB. 94dB & 114dB. Body Fat Caliper. Angle Finder / Depth Gauge. Tire Gauge. Sound Pressure Level. Simple & Easy Operation.

(Txt data file (see below). 0 dB = 1V/Pa) • Max SPL for 1% THD @ 1 kHz: 127 dB • S/N ratio: 70 dB A-weighted • Connector: gold plated XLR • Phantom power: 15V to 48V • Weight: 144 grams. txt file is available for the EMM-6.

With the backlight feature, it is appropriate for gathering the sound data at night. To save power, backlight auto power off function is provided. Dynamic characteristic of sound pressure: FAST 125ms, SLOW 1sec.

Drill bits. Tattoos & Body Art. Noise(A Weighting) 30~130dB 0.1dB ±1.5dB. Data Hold Hold. Motorcycle Accessories. Fast/Slow sampling: free response selection, press the button to perform even fast 125ms and slow 1 second response rate for higher accuracy.

We are here to help!

The device is complete in a very nice condition. Important information! to your country. Standard or expres.

/Lock current value. Accuracy: ±1.5dB. Frequency Response: 31.5Hz to 8KHz. Display: LCD Display. Frequency Weighting Features: A Weighting.

Range from 30 to 130dB. 30dB to 130dB. 35dB ~ 130dB. Fast/Slow dynamic characteristic. Level Range. Displayed at the upper limit. Displayed at the lower limit. 2Vrms ( at full scale ), 10mVDC / dB.

Model: AR854. LCD backlight display can provide clear reading for you. Max Hold Function: Yes. Made of high quality material, durable and long service life. Power: 4 1.5V AA battery(not included)(USB charging).

Like needle, small cross screwdriver, iron nail, toothpick and so on. MAX/MIN Hold Function will hold the highest/lowest reading until a higher/lower reading is picked up. With a wind-resistant ball, while reducing the effects of wind noise.

RS-232 Interface. each range step, impedance: 600 W. Maximum hold function. Maximum Hold Decay < 1dB/3min. Range A LO (Low) - Weighting: 35- 100dB. C LO (Low) - Weighting: 35- 100dB. A HI (High) - Weighting: 65-130dB.

The size of this noice tester is 56.1 177 36.03mm and weight is just 144g, portable and lightweight for you to carry. Type: noise tester. 1 Noise tester(battery not included). Feartures: equipped with large LCD screen for easy and convenient to look at the data.

Model: UT352. With overload prompt, data retention, LCD backlight function. Low Battery Indication. AC: 0.707Vrms full scale; Output impedance: around 600Ω. DC: 2Vrms full scale; 10mV/dB; Output impedance: around 100Ω.

Frequency Weighting Characteristic: A / C. With 2 equivalent weighted sound pressure levels A and C. Sound Level: Level 1: 30 ~ 80 dB. Resolution: 0.1 dB. Level 2: 50 ~ 100 dB. Level 3: 60 ~ 110 dB. Level 4: 80 ~ 130 dB.

LCD digital display convenient for a clear vision to see testing data. - High precision 30-130 dB sound or noisy tester. 1 piece Noise Tester. - Battery Type: 4 x AA Battery (Not Included). - Resolution: 0.1 dB.

• 1 Year warranty from BAFX Products® .

Storage Temperature and Humidity: -10℃~60℃, 0~90%RH. Max value hold: YES. Model Number: RZ1359. Frequency weighting characterstic:A Weighting.

●We will mark the price you want to declare after communication.

Low battery indication, Overrange indication. Battery: AAA(1.5V)× 3 (Batteries NOT included). Data update: 300ms. Storage conditions: -20°～60°/-4°～140°,10%RH～75%RH. Enable/Disable Auto power off. Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Range from 30 to 130dB. 30dB to 130dB. 20~80dB, 30~90dB, 40~100dB, 50~110dB, 60~120dB, 70~130dB. Fast/Slow Dynamic characteristic. 6 ranges in 10-dB step Displayed at the upper limit. Displayed at the lower limit.

Model: GM1359. Just press one button readings are instantly displayed. 1 noise tester(Battery not included). Auto Power Off, Low Battery Indication, Max Hold Function. If you do not receive our reply within 48 hours, pls.

A LO (Low) - Weighting: 35- 100dB. C LO (Low) - Weighting: 35- 100dB. AUX OUTPUT JACKS. Auxilitary Output. Maximum hold function. each range step, impedance: 600 W. Maximum Hold. A HI (High) - Weighting: 65-130dB.

We will be happy to resolve any issues you may have in a cordial and friendly manner. Storage condition: -10~60 ℃ 0~90%RH. All products are quality checked. Otherwise deal is final. Frequency range: 31.5Hz~8KHz.

IEC 61672, Type II. Auto Ranging. All the problems can be solved. Just do not open case.

Pocket size. DC Current. 3-1/2 Digital LCD, 2000 count. AC Current. Sound Level. 188(L) x 62.5(W) x 30.5(H)mm. Cables 27.5 mm. Instruction Manual ,Test Lead and Carrying Case.