Test Equipment Panel Meters

Pointer material: zinc white copper. (With a resistor to limited the current for protect the LEDs). Also note that monitor settings may vary from computer to computer and may distort actual colors.

1 X 200A/75mV Shunt. --Display: 0.28" LED digital tube. --Panel cutout 45.5x26.5 mm. connector&cable. --Current: 500A. --Size: 48x29x21 mm. All products are quality checked. Product View.

Display:Three 0.28 " LED digital tube. Display Color:Red. size:30mm x 10mm x 8mm.

Clear and easy to read scale and a button for fine tuning the dial. Also note that monitor settings may vary from computer to computer and may distort actual colors. (Approx) : 45mm/ 1.8"". Thread Size : 4.5mm/ 0.18"".

Design: LED Panel. Display Color: Green. Feature: 3-Digital Display, 3-Wire. Color: As the picture show. Category 1. With reverse connection protection.

Scale Range:DC 0-5V. Share your happiness, then there will be double happiness. Share your sadness or your anger, then there will be half. Has problems?. Cooperation is the beginning of our deal. Happy or un happy ?.

Dual 12 Stereo Level indicator DIY Kits. The data will be saved automatically after 5 seconds in every setting is changed. This is DIY Kits, Need you welding its by yourself. Strip show after peak lamp jump two bits to right disappears.

Display:Three 0.36 " LED digital tube. size:31mm x 14mm x 10mm. Display Color:Red. We will leave it for everyone that leaves it for us.

(1pcs 5V RGB MCU Adjustable Display Pattern Dual Channel Dual 24 LED level indicator. Audio signal: pick up the three lines on the headphone jack, respectively is a signal Ground (together with the power of the board negative) )left sound channel, right channel.

Scale Range:DC 0-20V. Thread Size: 0.37 x 0.83cm / 0.15" x 0.33"(D L). Overall Depth: 5.77cm / 2.27". Accuracy:Class 2.5.

1x Analog AMP Gauge. Display Type:Analog Only. Product information.

Also note that monitor settings may vary from computer to computer and may distort actual colors. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Accuracy :Class 2.5.

(Others may be adjusted). Header DC resistance: 630 Ohm. 1 x AC12V driver.

Converter&power module. The reset function of energy key. Energy: test range: 0-9999kwh. Current: test range: 0-100A. Power: test range: 0-10KW. LCD screen: 51 30mm(Length Wide). Size: 89.6 49.6 24.4mm(Length Wide High）. ).

Current: test range: 0~20a. Display format: 0.00~20A. The reset function of energy key. Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. Energy: test range: 0~9999kWh.

S1 in normal display mode,Adjust the intensity of the input signal. Signal input range: minimum 300 mv. Max 5 v (don't take too strong signal). maximum current: about 70 mA. Two buttons S1 and S2,Long press (more than 1 second)and Short press (less than 1 second greater than 0.2 seconds).

If you are satisfied with our service, pls. If you do not receive our reply within 48 hours, pls.