Test Equipment Frequency Counters

1Pc x 1Hz-50MHz Frequency Counter. You can select the power saving mode, if the frequency is not obvious changes within 15 seconds automatically turn off the display;. PCB size: 80 53 mm. The number of components is small, all straight-line components, installation and commissioning simple.

Frequency Range: 1~500 MHz, 100Hz resolution. Wide range: 1~500 MHz, 100Hz resolution. Input is via an SMA jack (female). 1 High Accuracy Frequency Counter. Standard interface for easy connections with other tests or antennas.

Independent double-IF design, adjust the minimum frequency step of 100 Hz,frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. RF IN (signal input): HX2.54-2P socket.

(Use 8 bit Microchip PIC16F648A,up to 1GHz. Automatic channel is automatically selected based on the frequency of the input signal level of channel. 2)High channel frequency (64 points ). Frequency reference.

Antenna long : 5cm. 1 x Antenna. 0802 lcd display. (no including / Battery ). standard interface for easy connections are other tests or antennas. or negative. Rate (item arrived).

Wide range : 1 ~ 500 MHz. 1 x High Accuracy Frequency Counter(Batteries antenna not included). 0802 lcd display. Compact Design and Easy to carry. Simple Construction. We maintain high standards of excellence.

1 MHz ~ 10 MHz: superior 60mVpp. 10 MHz ~ 60 MHz: superior 60mVpp. 60 MHz ~ 1.1 GHz: not tested. Frequency reference. POWER INPUT ( Power Interface ): XH2.54-2P side outlet port. Use 8 bit Microchip PIC16F648A,up to 1.1GHz.

1 MHz ~ 10 MHz: superior 60mVpp. 10 MHz ~ 60 MHz: superior 60mVpp. 60 MHz ~ 1.1 GHz: not tested. Frequency reference. POWER INPUT ( Power Interface ): XH2.54-2P side outlet port. Board interface. Use 8 bit Microchip PIC16F648A,up to 1.1GHz.

RF IN ( input ): HX2.54-2P socket. 65MHz frequency to Microchip, PIC16F628A as the core. Display driver using the LED chip digital tube display, high brightness, less external interference. Display digits: Six common anode LED display, the highest display six digits.

Master by the United States Microchip (Microchip) PIC16F648A as the core of 65MHz frequency counter. The frequency reference (Frequency reference). Display driver with LED display special chip, high brightness digital tube, less foreign interference.

Small Size: slightly larger than a 9V battery. or negative. We maintain high standards of excellence. Reply within 24hours. Rate (item arrived).

Hand made. 100% quality inspection. The item for sale is the complete board with OCXO (double oven), cable and mounting screws. Example photo - not exactly the item you will get.

(Frequency range 1 Hz. 50 MHz. - Optional addition or subtraction of a frequency offset (programmable). - 可以使用USB 5V或DC5-12V電源. - 如果頻率在15秒內沒有顯著變化，顯示屏關閉. or xx.xxx MHz).

5-digit display, the display is adjustable decimal point position and display unit, step adjustable coefficient values and units. Display Digit 0.56" 5-digits LED. After receiving the first signal. PIN Definition and Input Connection.

Independent double-IF design, adjust the minimum frequency step of 100 Hz,frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. Frequency reference. RF IN (signal input): HX2.54-2P socket.

1 x SF401 Plus Frequency Counter. Frequency Range: 27Mhz -3Ghz. CTCSS / DCS Decoder. DMR Radio signal e frequency counter. Changer in: Micro USB 5V. It is the tool of choice for maintenance personnel, test frequency and signal strength of wireless enthusiasts.

Counter Speed: depend on human's reaction. Sculpt: ring. We will do our best to solve your problem.

The reason it was ended was I now found the cords and microphone for it.

Independent double-IF design, adjust the minimum frequency step of 100 Hz,frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. Frequency reference. RF IN (signal input): HX2.54-2P socket.

RF IN ( input ): HX2.54-2P socket. 65MHz frequency to Microchip, PIC16F628A as the core. Display driver using the LED chip digital tube display, high brightness, less external interference. Display digits: Six common anode LED display, the highest display six digits.

Independent double-IF design, adjust the minimum frequency step of 100 Hz, frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. Frequency reference. RF IN (signal input): HX2.54-2P socket.

Independent double-IF design, adjust the minimum frequency step of 100 Hz, frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. RF IN (signal input): HX2.54-2P socket.

Independent double-IF design, adjust the minimum frequency step of 100 Hz, frequency range 0 ~ 99.9999 MHz, can be set to increase or decrease the IF frequency mode. Frequency reference. RF IN (signal input): HX2.54-2P socket.

Type: gap film. Fuel tanks, pipes, filters (13). It will not reflect the total price you paid or the market value of the product. Different country with different tariff rules. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Agilent/Keysight DIY 53131A 53132A Compareable to Ultra High stable Oven 53132A-012 53131A-010. Reference IC I am having on this board is MAX6350CSA which is 1PPM Tempco, Expensive, but better than original Agilent/Keysight board or any board available on evilbay.

Frequency range: 50MHz~2.4GHz. Uplink displays frequency; downlink displays CTCSS. 1 X XH-560S Frequency Counter (Is OEM). 0.1K will display 4-digit; 1K will display 3-digit. Long press the power button can select 0.1K or 1K.