Radio Communication Mounts

With this new Soft-Key who safely acts as an amplifier interface between your modern transceiver and the Linear Power Amplifier. - COLLINS 30L-1. - HEATHKIT SB-200/201. The switchingtransistor is inflat position, to install the module in a reduced space, (see pics).

This case has an opening on the outside of the box to easily pass through your micro USB power cable to your Raspberry Pi 0W inside. This case will fit the combination of the Raspberry Pi 0W and the mounted Jumbospot/Chinaspot/MMDVM/Zumspot and you may have either the board-mounted ceramic antenna or a SMA-mounted antenna with a right angle adapter.

K40 Unimount U40.

This is a new bracket in a open box which is missing it's hardware. Otherwise it's never been used. Be sure to check your handbook for correct application of radio for mounting bracket. MOUNTING BRACKET.

1 x SO239 UHF-Stecker Winkel Anschluss für PL259 / CB-Antennen. 1 x Halterung für CB Funk Antenne.

Options for ICOM IC-2730.

PAS38 Valor Enterprises Pro-Am. Antenna Surface Mount Kit. Motorola Style Mounting. 3/8" Hole Mount.

Mount your CB antenna up front where the best ground plane exists on Jeep Wranglers. Far better than attaching to the bumper, the AUJ1 fender mount positions your two-way radio antenna for best refraction.

The MBA-5 then is held by the MBF-1 base.

For ID-5100. such behavior.

Original RLN6466A Low Proflie Mounting Bracket. Compatible with MOTOROLA. Includes Wing nuts and Mounting Screws. MOTOTRBO™XPR™4550. MOTOTRBO™XPR™4500. MOTOTRBO™XPR™4380. MOTOTRBO™XPR™4350. MOTOTRBO™XPR™4300.

This is a new bracket complete in it's original box. Be sure to check your handbook for correct application of radio for mounting bracket. MOUNTING BRACKET. 2-WAY RADIO. REMOTE HEAD.

Model # LBH3400. For use with NMO style antennas. TheAntennaFarm is an Authorized Laird Technologies Dealer. Manufacturer Laird Technologies. Dual Band Base Antennas. VHF Base Antennas. UHF Base Antennas.

Workman KA-52. Heavy Duty Antenna Spring for 3/8" x 24 Thread Antennas.

With 12' RG-58AU Coax PL to Lug Hookup. Molded Antenna Side Body Mount. EXIT 160, I/57 & I/70. EFFINGHAM RADIO REPAIR. INSIDE HEARTLAND PETERBILT. With 3/8" x 24 thread. OVER 20 YEARS EXPERIENCE. c n ( 225. ).

This case has a wired micro-USB socket to the outside of the box to easily connect/disconnect of the power cable and a power pigtail inside for the Raspberry Pi 0W. This case will fit the combination of the Raspberry Pi 0W and the mounted Jumbospot/Chinaspot/MMDVM/Zumspot and you may have either the board-mounted ceramic antenna or a SMA-mounted antenna with a right angle adapter (as pictured).

The manufacturer will change contents, date and quantity for sale. [ Other Carrier ]. We do our best for you!! [ Multiple sizes and colors ]. [ Condition ].

1x Stainless steel Trunk lid, hatchback mount bracket. Rubber mounting pad protects mounting surface. Material:Stainless steel and plastic. Four screws insure mount strength for larger antennas. 1x Hexagonal wrench(small).

This case has a wired micro-USB socket to the outside of the box to easily connect/disconnect of the power cable and a power pigtail inside for the Raspberry Pi 0W. This case will fit the combination of the Raspberry Pi 0W and the mounted Jumbospot/Chinaspot/MMDVM/Zumspot and you may have either the board-mounted ceramic antenna or a SMA-mounted antenna with a right angle adapter (as pictured).

3/8”-24 thread fits all standard antennas and mounts. Allows for quick and easy antenna removal for car wash or garage parking or to prevent theft. The K-1A has an internal locking design. We will try our best to resolve the issues.

Model # TMB8. No Holes Mounting Solution. Uses hidden set screws to hold in place. For use with NMO style antennas. TheAntennaFarm is an Authorized Laird Technologies Dealer. Manufacturer Laird Technologies.

Workman CB Hump Mount DD-78B. Condition is New. Shipped with USPS First Class Package.

Supported devices: IC-2730/D. Product number:MBA-4.

ADJUSTABLE BRACKET BOLTS TO VEHICLE HUMP OR TABLE SURFACE. TOP TILTS FOR BETTER VIEW OF RADIO OR SCANNER. STRONG STEEL CONSTRUCTION. Over 100,000,000 served.

Jumbospot Chinaspot MMDVM Zumspot. This case has an opening on the outside of the box to easily pass through your micro USB power cable to your Raspberry Pi 0W inside. This case will fit the combination of the Raspberry Pi 0W and the mounted Jumbospot/Chinaspot/MMDVM/Zumspot and you may have either the board-mounted ceramic antenna or a SMA-mounted antenna with a right angle adapter.

Firestik MK-294R PICK-UP STAKE HOLE MOUNT. fiberglass whip. CB RADIO PICK UP MOUNT ANTENNA KIT. Now you can install a CB or scanner antenna on the bed rail of your pick-up without drilling holes in the exterior of the vehicle.

Connect an RH-5R handheld radio to the grab handle on a Jeep JK.

L shape NMO Bracket. Mount connector: NMO. 1x Bracket with cable. Bracket made of Stainless, very good quality. Cable's connector: (PL-259). Cable to radio's connector:M-male (PL-259).

<p>Hustler Antenna Spring, Heavy Duty, Quality Stainless Steel w/ 22” Extension Rod.</p><p>Heavy duty! Weights almost 2lbs (scale not included)</p>

ACCESSORIES UNLIMITED AUGM2-L STAINLESS STEEL FENDER MOUNT FOR. 2001 & UP SILVERADO AND OTHERS. Fits 2001 – 2007 Silverado. Mounts on the left side only behind the hood hinge.

This is a custom made bracket with sleeve for the Kenwood NX=5700/5800/5900 model radios. Will mount in dash of any vehicle where am/fm radio is installed. This will give your two way radio install a clean look.

Z Tactical Model No. - Quickly attaches or releases from the rail.

Compatible: for Yaesu FT-7800R / FT8800 / FT8900 / FT1900 / FT1907 Radio. The structure of the product is very stable, it can well fix your intercom, it makes your intercom safe. 1 Intercom bracket.

HSN4032 & HSN4031. Speaker Bracket w/ Hardware.

This bracket can be attached to the Icom MBF-1 or other bases. (Not Included). ICOM MBF-1 Suction Cup Mount. Modifications void your warranty (especially radio MARS/CAP modifications).