Pinball Collectibles

The Who´s Tommy Pinball Wizard Holes Protector Set. Protect your pinball, make it last! Don´t forget to Play Pinball! Life is short, Play More. Left Scoop VUK hole VUK Plastic protector.

Rare Non Coin Operated Marvel Pinball Machine. Condition is Used. This machine seems to be fully functional with lights and sound. The right side paddle works but seems to be a little bit weak I have included a picture of the corner peeling of graffics. I had a quote of $150 to duplicate and rewrap the graphics to pristine condition. I have spent a lot of time trying to find this machine with the same graffics and was unable too find it   I will set the reserve low for room to restore it perfectly. Iv only found 2 of the marvel no coin op and they each have a different theam and price wayyyy over a thousand

This does not detract from the overall appearance. The Seeburg script still has the original color. The die cast top has been copper filled to fill up all the pits, sanded and nickel plated. All the fine detail linesare still visible.

Data East / Sega MPU CPU 520-5003-04. Used from Back to the Future to Batman Forever. Sold untested and "AS IS".

In around 100 sample machines. Earthshaker moving Building kit. machines had! Here is a rare opportunity to upgrade your machine with the ultimate Earthshaker mod. Unlike a previously. this building sunk into the playfield when balls were locked or in muti ball modes.

.CHOOSE EITHER BLUE,RED OR GREEN EYES WHEN ORDERING. Torso and pair of arms made of rigid foam that appear to be crawling out of the grave.

No toilet parts or mounting screws are included. If you need one I suggest you buy one before they are all gone.

Colors stay vivid even under LED Lighting.

Yes it is motorized and does spin!!! RECORD WILL SPIN Best of all EASY installation. ..less than 10 minutes!!!

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

When doing all of my restorations, I decided to design my own cabinet stencil artwork since the only artwork available was inferior to what I was capable of designing myself. For sale is a collection of my own cabinet art for Bally, Williams & Stern pinball titles.

Revenge From Mars Pinball 2000 Computer. This has been pulled from a working Revenge From Mars Pinball machine. This has been tested and is working 100% in my Pinball Machine. Even though this computer is working in my machine, I cannot say 100% that it will work in the pinball machine you will be placing it in.

Good condition.

PLUG AND PLAY.

TOWERS ONLY!!!! Sign NOT included !!!’ Color changing... 12 colors to choose from MUNSTERS Pinball machine TOPPER
Note these are Custom built and made to order
Custom orders are not returnable

CAPTAIN FANTASTIC PF OVERLAY PERFECT FIT - INSERT AREAS ARE CLEAR WITH TEXT - DIE CUT - SELF STICKING LOOKS FACTORY WHEN INTALLED!!!! INSERT AREAS ARE CLEAR WHERE THEY ARE SUPPOSED TO BE

Brand new reverse screen printed laser cut Jurassic Park Lost World topper comes with brackets already mounted or you can use your existing brackets if you're replacing your broken topper either way all you have to do is screw this top or under the top of your cabinet

HIDDEN TEXT JUST LIKE THE ORIGINAL BACKGLASS HAS. Colors stay vivid even under LED Lighting.

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

Up for sale is aNEW 2019 version of my Waterworld pinball machine TV mod. (A pinball machine is not for sale here, only my mod). Waterworld mod in action! The sound kit adds amplified speakers that you can place inside or on top the head of the machine.

Using proprietary next gen multi layer technology.

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

High Speed Pinball Police Light Beacon assembly. Includes Mounting plate, Reflector, Bulb, and Motor. Wired to be plug and play with factory wire harness. Williams Part Number: C-10933.

Includes original box. Made by Wolverine, USA. It includes 5 silver balls. All the electronic parts are present (light bulb, bell etc.) but the wires are disconnected and I am unsure of how to hook them up and test them.

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

BLACK KNIGHT PLAYFIELD OVERLAY SET. APPROVAL FROM PLANETARY PINBALL. PERFECT FIT - INSERT AREAS ARE CLEAR WITH TEXT - DIE CUT - SELF STICKING. UPPER AND LOWER PLAYFIELDS.

COMPLETE SELF STICKING PLAYFIELD OVERLAY. XENON PF OVERLAY. PERFECT FIT - INSERT AREAS ARE CLEAR WITH TEXT - SELF STICKING.

Original files have monster resolution and this decals printed in super high quality, pure colors, without noise, with lamination of course. For example side decal have resolution around 30k on 15k pixels.

Beautiful Playfield Sideboard Custom Decals to enhance your Bally Judge Dredd pinball machine to the max! 1 x Left Side Inside Cabinet Decal. 1 x Right Side Inside Cabinet Decal.

This is the simplest, no-solder, no-crimp solution to combine the separate horizontal and vertical CGA video sync signals into a composite sync. If you have a Star Wars Episode 1 (SWE1) pinball or Revenge From Mars (RFM) pinball machine this kit will help you convert from the original CRT monitor to a VGA monitor.

Depending on the particular pinball machine, a protector can be installed within a few hours including cleaning, which should be done in parallel. The playfield needs to be partially stripped down, so that the protector can be easily placed on the playfield.

Colors stay vivid even under LED Lighting.

Starting at the top left.

KISS PLAYFIELD OVERLAY PERFECT FIT - INSERT AREAS ARE CLEAR WITH TEXT - DIE CUT - SELF STICKING LOOKS FACTORY WHEN INTALLED!!!! COMING SOON. WE ARE CLEARING OUT OUR 9,000 SQ FOOT WAREHOUSE. Over 120 Pins, Arcade Games, 15,000 BOARDS, Hard to Find NOS Parts, 300 Populated Playfields Some Pics of our climate controlled warehouse are Below. ALL THE INSTALLATION HOLES WERE TRACED AND PRECISION CUT OUT OF OVERLAY EACH INSTALL CUT OUT WAS ADDED TO THE AUTOCAD DXF CUT FILE THE OVERLAY IS PRINTED ON CLEAR VINYL SO THE INSERTS WILL LOOK FACTORY WHEN INSTALLED OVERLAY INSTALLED ON PLAYFIELD