Keyless Entry Remotes & Fobs for Mitsubishi Outlander

Mitsubishi Outlander Car and Truck Keyless Remote Fobs

Keyless entry remotes allow you to enter and exit your Outlander without having to insert a key. While you will always have a traditional key as a backup, the key fob can have a number of features that can be advantageous. There are a variety of keyless remote fobs available to choose from, so you are sure to find one that fits your Mitsubishi Outlander.

If the original keyless entry remote has been lost or damaged, finding the right replacement for your Mitsubishi Outlander might seem difficult. However, there are two things you can consider that will help you determine what remote you need:

• FCC ID code: Each vehicle make and model comes with one FCC ID code. Some makes and models may share the same code, but each vehicle only has one. This FCC ID code can also be found on the back of key fobs. In order for a specific remote fob to be able to work with the Mitsubishi Outlander, the codes need to match. If you know the code, you simply need to look for a remote that shares that code.
• Check the manual: If you donu001at know what the vehicles FCC ID code is, it should be listed in the manual. Keep in mind that the code may be different between model years.

Some keyless entry remotes have certain features, including:

• Keyless entry: This feature allows you to push a button on the key fob to automatically unlock your car door.
• Truck opener: Some remotes have a button that opens the trunk.
• Panic button: This button is commonly found on many remotes. In an emergency, it can be used to set the cars lights and horn off when you are not near the vehicle. Some drivers also use this remote function to find their Outlanders in crowded parking lots.
• Car alarm system: If your Outlander has a car alarm system integrated with the keyless entry, you want to make sure that this feature is available on the key fob.
• Remote start: Some remotes allow you to start your Mitsubishi without having to have the key in the ignition.

When it is time to program your keyless entry remote, there are several steps you will need to take:

1. Find the data port. This should be located under the dashboard on the drivers side.
2. Insert the key into the ignition and leave it in the "off" position.
3. Connect the data port terminals 1 and 4 with a jumper wire. This wire will stay connected throughout the programming procedure. Immediately press the hazard switch six times. The doors will automatically lock and unlock as part of the programming procedure.
4. Press the "lock" button on the keyless entry three times within 10 seconds. The doors will automatically lock and unlock.
5. Disconnect the wire and remove the key from the ignition. Your Mitsubishi keyless entry remote should be ready to go.