Capacitance Meters & ESR Meters

Inductance: 0.01mH - 20H. All symbols are surrounded by the probe numbers of the Tester (1-3). and is shown with two. Capacitor: 25pF-100000uF. 1.9 Detection of the protection diode of bipolar transistors and MOSFETs.

(Resistor) depends on capacitance value. It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2 pi F C). During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.

1 X Capacitance Tester. Capacitance: 200 pF-20 mF. Show Range choices: manual range. Basic function: range. If you encounter any trouble. It is fast, Easy and Safe. Net weight:176g.

(A bad E-capacitor will have larger ESR and create large ripple rather than filtering noise. Normally, a big capacitor is larger than 3 ohm. What is ESR of capacitor?. 4) Embedded 25V capacitor table at LCD, auto display the capacitor is good or bad reference to common 25V electrolytic capacitor.

LCD backlight. 1 Pair Test Lead. 200pF/2000pF/20nF/200nF/2uF/20uF/200uF ±0.5% ; 2000uF ±2.0% ; 20mF ±4.0%. Product Weight: 200g.

LCD backlight. 1 Pair Test Lead. Product Weight: 200g.

ESR Tester Instructions If the value is much less than the standard. Test lead resistance zeroing. Size: Approx. 13.5 x 7 x 2.5cm ( L W H). Non-polarized test leads due to no DC component in the test signal.

• Inductor: 0.01mh – 20H. • diode (including double diode), thyristor, transistor, resistor and capacitor and other components. • Inductors, capacitors, diodes, dual diode, mos, transistor, SCR, regulator, LED tube, ESR.

All stalls are automatic range, the use is very convenient. The button has a total of 5, "Reset" to 0 "HC" button, large capacitance, inductance, select "HL" option, "L/C" and black expansion function button.

Test frequency range: L/C about 500KHZ/Big inductance 500HZ. Item information.

(Model: UT200A. Jaw Capacity: 28mm. Input Impedance for DCV: Around 10MΩ. Resistance (Ω): 20KΩ ±(1% 4). AC Current (A): 2A/20A/200A ± (1.5% 5). Low Battery Indication: √. Power: 9V Battery（6F22)(not included).

Alta prova velocità, prova valida componente: 2 secondi (tranne nel più grande condensatore di grande capacità misura inoltre richiede molto tempo, il tempo misurato di un minuto è normale). Condensatore: 25pf -100,000 uf.

LCR-T3 graphical multi-function tester resistor capacitor SCR diode transistor mos tube inductance. Inductors, capacitors, diodes, dual diode, mos, transistor, SCR, the regulator, LED tube, ESR.

Range from 0: 01mH than 20H, but the accuracy is not good. Both ends of the resistor symbol is shown connected to the tester probes number (1-3). 6 Automatic detection PNP and NPN bipolar transistor, N, P-channel MOSFET, JFET, diodes, dual diode, thyristor SCR.

Using the 12864 big LCD . series resistance ESR. The two values ​​can be displayed with. 1 using the latestGM328 version 2015 V1.12 software, features more than the M8 version. N-channel and P-channel MOS FET, JFET, diodes, dual diode.

Model: XC6013L. 200UF /-0.5% 0.1Uf. Capacitance tester. Capacitance Range 200pF. Convenient to carry. If you encounter any trouble. 20mf /-4% 10uf. 2000Uf /-2% 1Uf.

Auto scanning, it identifies resistor, capacitor and diode automatically. Long press the “FUNC” key to turn on/ off this tester. 1 SMD tester. Continuity testing. When the resistance is less than 30Ω, it will sound.

Inductance: 0.01mH - 20H. Automatic detection of NPN and PNP transistors, N -channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components.

Model: XC6013L. Capacitance tester. Capacitance Range 200pF. Convenient to carry. 2nf /-0.5% 1pf. 1 X probes. 200pf /-0.5% 0.1PF.

ESR Tester Instructions If the value is much less than the standard. Test lead resistance zeroing. Non-polarized test leads due to no DC component in the test signal. Size: Approx. 13.5 x 7 x 2.5cm ( L W H).

ESR Tester Instructions If the value is much less than the standard. Test lead resistance zeroing. Size: Approx. 13.5 x 7 x 2.5cm ( L W H). Non-polarized test leads due to no DC component in the test signal.

LCR-T3 graphical multi-function tester resistor capacitor SCR diode transistor mos tube inductance. Inductors, capacitors, diodes, dual diode, mos, transistor, SCR, the regulator, LED tube, ESR.

Das ist das Gesicht hinter richyleo. Damit Sie wissen bei wem Sie kaufen. - Abholung ist auch gerne moeglich, allerdings nur nach vorheriger Absprache. - Pictures are better than words.

What is ESR of capacitor?. 4）Embedded 25V capacitor table at LCD,auto display the capacitor is good or bad reference to common 25V electrolytic capacitor. During repairing TV,LCD,Audio board,etc.we can in circuit testing the capacitor is good or not.

Range from 0: 01mH than 20H, but the accuracy is not good. Both ends of the resistor symbol is shown connected to the tester probes number (1-3). 6 Automatic detection PNP and NPN bipolar transistor, N, P-channel MOSFET, JFET, diodes, dual diode, thyristor SCR.

12864B 128X64 Dots Matrix Graphic LCD Module Display Screen Green Backlight LCM. Produced LX-12864B type LCD module due to the compact and lightweight, easy to use, clear display, widely used in various man-machine communication panels.

(Resistor) depends on capacitance value. It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2 pi F C). During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.

Crystal test range: 4M-30M.

It can detect 2UF above capacitor equivalent series resistance (ESR), a resolution of 0.01 ohms. This feature is very important for the detection of the capacitor performance. Both ends of the resistor symbol is shown connected to the tester probes number (1-3).

LCD backlight. 1 Pair Test Lead. 200pF/2000pF/20nF/200nF/2uF/20uF/200uF ±0.5% ; 2000uF ±2.0% ; 20mF ±4.0%. Product Weight: 200g.

Inductors, capacitors, diodes, dual diode, mos, transistor, SCR, the regulator, LED tube, ESR. diode (including double diode), thyristor, transistor, resistor and capacitor and other components. 3:Can detect the transistor, MOSFET protection diode amplification coefficient.

It can detect 2UF above capacitor equivalent series resistance (ESR), a resolution of 0.01 ohms. This feature is very important for the detection of the capacitor performance. Dual LEDs detected as double diode.

LCR-T3 graphical multi-function tester resistor capacitor SCR diode transistor mos tube inductance. Inductors, capacitors, diodes, dual diode, mos, transistor, SCR, the regulator, LED tube, ESR.

Self test with automatic calibrationIt can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc.It can also be used to detect infrared wave forms.After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form.One button operation, automatically detect and shutdown, and you can press the multi-functional button to close the detector too.Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen c.

7 working current < 50 mA. 10 the Size 57 45 20 mm Length X Width X Height. 9 Storage temperature - 40 ℃ ~ 65 ℃ Celsius.

(It is a series resistor inside capacitor, using 100kHz to remove the impedance 1/(2 pi F C). resistor) depends on capacitance value. During repairing TV, LCD, Audio board, etc. we can in circuit testing the capacitor is good or not.